Troubleshooting a Hot Water System Failure: What to Do If It Stops Working
Troubleshooting a Hot Water System Failure: What to Do If It Stops Working
Blog Article
Just how do you actually feel in relation to How to Troubleshoot and Repair an Electric Water Heater?
Numerous modern residences take advantage of an electrical water heater for their heating unit, because of its benefit and also convenience of use. Nevertheless, just like any other electric devices, issues may arise with its use, all of a sudden. It can be really irritating to get up to a chilly shower instead of a warm one or having your bath with water that isn't warm enough or even too hot. Whatever the case might be, water heater problems can be rather aggravating. Fortunately, we've made a checklist of feasible services to your hot water heater problems. There are a number of variables that can trigger a number of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety. Whatever the problem is, getting it fixed should not posture excessive of a problem if you follow these actions:
Call An Expert:
If after replacing all damaged parts and resetting your temperature level, the hot water heater still isn't functioning, you may need to speak to a specialist plumber for an expert viewpoint. The problem with your heater could be that the cold and hot taps have been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the instance may be, an expert plumber would certainly help resolve the issue.
Examine Your Power Supply:
As fundamental as this may appear, it is very needed. Without adequate power, your hot water heater will not work. So the first thing to do when your water suddenly retires is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, just turn it off and on once more. Replace any kind of damaged or damaged fuse. Check the device with power after these changes to see if it's now working.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot sufficient, you may require to check the temperature level setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red button for temperature reset over the thermostat. This ought to help heat up the water. Turn the breaker back on and examine if the issue has been fixed.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still working. Test each of your heating elements to be sure the problem isn't with any of them. If any one of them is faulty, change that component and afterwards inspect whether the warm water is back on.
Verdict
Water heater problems are not constantly major. A lot of them are because of small issues like a blown fuse or damaged burner. Replacing the malfunctioning components must do the trick. Nonetheless, if you are still not able to address the issue, give a call to your nearest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you enjoyed reading our excerpt about What Would Cause My Electric Water Heater to Stop Working?. Thank you for spending some time to browse our blog post. Do you know about somebody else who is fascinated about the topic? Feel free to share it. Thanks for your time. Visit us again soon.
Ensure plumbing integrity; reach out. Report this page